Create A Good Working Environment For The Cooler

In the application of coolers, how to design coolers, the reasons for the environment, installation location, ventilation and other issues need to be taken into account. Jinghong will not elaborate on the principles and tips of the layout. To make the cooler work, there are two major details that must be paid attention to.

Take an air cooler as an example:

Placement

1 The air cooler should be arranged on the leeward side of the minimum frequency wind direction of the device throughout the year;

2 The air cooler should be arranged above the main gallery, the top layer of the frame or the top of the tower;

Note: The air cooler should not be arranged above the operating temperature equal to or higher than the spontaneous ignition point of the material and the equipment for conveying and storing liquefied hydrocarbons; otherwise, a partition of non-combustible materials should be used for isolation protection;

Arrangement rules for multiple groups of air coolers

1 When multiple groups of air coolers are arranged together, they should be arranged in the same form, and should be arranged in rows; it should be avoided that some groups are arranged in rows and the other parts are arranged in rows;

2 The distance between the frame columns of two humidifying air coolers or combined dry and wet air coolers arranged side by side shall not be less than 3m;

From the arrangement of a single cooler to the combined use of multiple coolers, the details mentioned above need everyone's attention. If you want the cooler to work well, it is very important to create a good working environment for it. Necessary.